The DTRU200 “Drippy” will help you roll your 5/8” drip tape

irrigation into tight rolls that can be stored year after year.

Drill powered Drippy consists of a welded steel frame and an ABS rotor.  This farm tool is specifically designed to roll up drip irrigation used in small scale farms. The frame provides a bearing for the rotor to turn and quickly roll up your drip tape. Drill cradle provided for ergonomic use.   The tape runs through the tape guide which provides just enough drag on the incoming tape to roll it tight and dewatered for best storage and reuse. Standard drill, socket adaptor and 3/4” socket are required, but not included.

Store tape like this

>>>>>>>>>>>>>>>>

Store tape NOT like this

>>>>>>>>>>>>>>>>>>>

Use standard cordless drill with 3/4” socket & adaptor (not included) to turn the rotor. There is a slot in the rotor to hold the tape at the start of rolling.  The rolled up tape slides off the rotor and out of the slot for safe storage. You can also stuff the tape termination into the rotor cavity.  This will save time during shutdown and startup.

Made in USA Veteran Owned Patent Pending

Additional Information:

  • Compact and sturdy welded frame is designed specifically to roll up drip tape. The frame provides an open bearing for the rotor to turn. The open top of the bearing allows the rotor to be removed to get the roll of tape off easily.

  • The drill and drive nut combination allows for easy drill engagement and disengagement to accomplish quick rolling and then easy removal of rolled up drip tape.

  • Frame is 14” H x 11”L x 5” W weighs 7 lbs.

  • Shipping and taxes will be calculated from Denver and charged at checkout.